Détail de la notice
Titre du Document
Filtering of NDT signals obtained from wrapped steel cables
Auteur(s)
CHRISTEN R. ; NOVAKOVIC A. ; BERGAMINI A. ; ...
Corporation(s) du ou des auteurs
Society of photo-optical instrumentation engineers USA (Organisateur de congrès); American society of mechanical engineers Dynamic systems and control division USA (Organisateur de congrès); Intelligent Materials Forum Mitō Kagaku Gijutsu Kyōkai JPN (Organisateur de congrès); Jet Propulsion Laboratory USA (Organisateur de congrès); National Science Foundation USA (Organisateur de congrès)
Résumé
The main cables of suspension bridges are often wrapped with a steel wire, in order to compact the cable and hold it in shape. If a non-destructive evaluation by means of magnetic methods is performed on such a cable, disturbances due to the wrapping can be expected in the measured signal. In the presented work, these disturbances shall be quantified and compared to the flaw signals. Different approaches for the separation of the disturbance and the flaw signal are discussed. Additionally, the possibility to detect wire breaks and corrosion within an unwrapped steel cross-section could be shown in laboratory measurements. The influence of the wrapping was investigated using finite element (FE) simulations and experimental laboratory measurements. A parameter study was performed in order to obtain data in which the components from a flaw and the wrapping can be separated. The parameters varied in this study were chosen depending on the prospect of success and the cost of the realization. Using these data sets different filtering methods, such as wavelet analysis, were implemented. A final comparison of the different methods suggests the most efficient way to assess the condition of such cable systems using magneto-inductive testing. Finally, it can be concluded that the use of FE simulation is a very useful tool for the development of new data analysis methods, even if a real set-up and data from measurements exist.
Editeur
SPIE
Type du document
Conférence : Nondestructive characterization for composite materials, aerospace engineering, civil infrastructure and homeland security, San Diego CA, USA, 2007
Identifiant
ISSN : 0277-786X ISBN : 978-0-8194-6652-5/0-8194-6652-2 CODEN : PSISDG
Source
Proceedings of SPIE, the International Society for Optical Engineering A. 2007, vol. 6531, pp. 653110.1-653110.12 [bibl. : 7 ref.] [nb. vol. : 1]
Langue
Anglais
Pour les membres de la communauté du CNRS, ce document est autorisé à la reproduction à titre gratuit.
Pour les membres des communautés hors CNRS, la reproduction de ce document à titre onéreux sera fournie sous réserve d’autorisation du Centre Français d’exploitation du droit de Copie.

Pour bénéficier de nos services (strictement destinés aux membres de la communauté CNRS (Centre National de la Recherche Scientifique), de l'ESR français (Enseignement Supérieur et Recherche), et du secteur public français & étranger) :